N. NETDOTGen10 Magnetic Fast Charging USB-C to USB-C Adapter Converter Compatible with Type-c Smartphones (3 Pack Black)

These adapters work just like the naked port! I've used them for charging, flash drives, MicroSD readers, keyboards and mice. No difference between these and the actual port. Great for reducing the wear and tear of constantly plugging/unplugging drives. Just be sure to unmount/eject drives to prevent corruption and data loss. (If any phone manufacturers are reading this, magnetic ports should be the new standard, not an add on.)

No complaints here, they work exactly as expected. The magnet strength is sufficient. It will hamper charge speed a little bit, but not a big deal.

UPDATE 4/22/22 - I emailed NETDOT to see if I can get a replacement for the cracked adapter. They responded fast, gave me no hassles and sent me replacements which arrived in 2 days! This reinforces why I've been buying NETDOT adapters for my past 3 phones. Awesome customer service. Thanks!UPDATE 4/20/22 - I was surprised that I'm writing this but I actually had a magnet break on me. I have a case so it fits and is about half protected but it wasn't dropped. My phone tipped off the cradle oddly on the corner but I saw a sliver flip off. When I went to look, it was a half of the magnet on the tip that stays on the phone! So now I have to look for a new set or another brand as the other's 3 pack of tips only may not be compatible. Very shocked as my older generation ones from netdot were much more durable. It seems the possibly new magnetic material while stronger in pull, is more brittle in strength.Original:I usually purchase NetDot cables and such because they seemed to be a good balance of cost and quality. From my past generations of magnetic cables, I can certainly say they upgraded the strength of the magnet and the connection design for more consistent contact. My only gripe is that the source end was not as snug so when I did like in the past, where I would just be able to lift and it would just fall off the connection, I noticed that the adapter would stay on as a unit and the source cable would be the one that let goes. In other words, the magnet holds stronger than the cable to the adapter. I tried most of my cords and it seems that most of them have a light hold as well. I think they need to check this out in the manufacturing process, maybe the charger connection housing/bracket need a tiny more pinch for a snugger fit?

As I said doesn't work (at all, NO power) with PD (Power Delivery) only interfaces.If its something like Anker or QuickCharge, those seem to be working fine.That being said, I didn't buy them for my apple products I bought them for my micro-usb things.I will probably replace them with something that supports power delivery because you don't always get to choose where you plug in your cords. Its better to have something that supports QC AND PD

My phone charging port was getting more and more worn out. It was not wanting to keep charging cables plugged into it. I cleaned out my port as best as I could, then I installed one of the magnet chargers. It has been very nice getting a good charge on my phone without too much worry of the charger falling out. The magnets have a decent hold. Note: my son's newer Pixel phone would not recognize the magnet charger.

The magnets don't hold the cord to the phone very well. I have seen similar products from other people and those were very versatile. With this product, you are unable to hold your phone in your hand without the cord coming loose. There are other products that are better and actually work. Sometimes this product reduces the charging power and you have to fiddle with the connection for it to work at full strength.

I previously had the Volta magnetic cable adapter for my setup. I already have all of my cables and wasn't going out of my way to replace them all with the Volta cables and just got the magnet adapters instead. Because of my work the magnet tip on my phone would often get gunked up with magnetic dust. Well, Volta decided to stop selling the adapters so I went looking for an alternative solution. Imagine my surprise when I found the exact same product under a generic name for half the price! These even work with my old Volta adapters.There are some pros and cons with these and you may find yourself removing them from time to time. Most notability if you're trying to use your phone while plugged in, the magnet is strong but not strong enough usually to try playing games while charging. I always impress people with how easy it is to mount my phone in the car with a magnetic car mount and charge cable.

Really liked the idea of these. They came in quickly and they fit just fine. I used my existing fast charging cables. However, once installed the phone stopped fast charging... would plug my phone in and come back an hour later and it wouldn't be any higher percentage than when I first plugged it in. I thought it was just mine, but my husband's would not fast charge either. We both have S23 Ultras. My mothers phone also would not fast charge and she has an A70. We ended up just going back to using our fast charging cables.

I have been buying NetDot cables for years and was satisfied until now. Went on a trip and forgot my magnetic cable twice. When I tried to remove the magnet connector from the phone it split in two each time and the part stuck in the phone was a pain to remove. It is a piece of garbage.

Lamentablemente no funcionó con un adaptador de video de USB-C a HDMI, solo funciona para transmisión de datos. Esperaba que funcionara con video en uno de los puertos thunderbolt. Debido a eso las 3 estrellas.

SI vous le brancher l'adaptateur a un portable (exemple pour le charger) sur une surface plate (une table par exemple) ca tiens bien, mais si vous bouger ou soulever le portable l'aimant n'est pas assez fort et l'adaptateur se detache.

Broken after few months. Won't recommend.

The magnet is so weak that the weight of the USB charging cable disconnects the adapter as soon as you let it go. Only useful if the device is going to be on a flat surface, that will support the charging cable