Single Desk Monitor Arm Mount Stand Fit for 13 inch to 32 inch Flat Curved Computer Screen with Swivel, Height Adjustable, Rotation,Holds up to 35KG, Black

Whilst this post doesn't state it supports a 49" ultra wide monitor, when looking at the specs, the weight it supports is more than enough for my 11kg monitor. You can't rotate but I would never need to for this monitor. All works perfectly and great quality. - Past monitor arm experience - I've used monitor arms in the past and for this large monitor however when a monitor arm says up to 10kgs, they're usually going to slump somewhat when you get near that mark. So the perk of this is the value and the weight it states it can support up to and I can confirm there's no slumping! - Quality - Reviewing how this is put together, it's a simple and effective design, in particular where the monitor and the mount meet. You can adjust the angle and really tighten it for those heavier monitors. There's been no slumping at all. It swivels effortless should I need to turn it and if the monitor arm back was high enough rotate would be simple. - Implementation - Very easy. It took me about 20 minutes to install and that was because I had to clear/move the desk and find a pair of plyers to make sure the backs were super tight. Installation is like most monitor arms. - Size - as you can see from the pics, it works great for my monitor. There are 4 holes at the back for different height adjustments. I maxed out at the top level which aligns to the original stand this monitor came with. It's nice and flat and doesn't take much space from the back of the desk when connected as you'll see. I actually really like the design of the pole. It's wider than a standard pole and I think that looks visually better - certainly gives confidence in the strength. Overall, I feel like this is a great value product and I'm pleased I came across this. I would recommend.

Have used this with 34” monitors but currently just got my 27” on there, easy to put together, can position the monitor really well, doesn’t damage the desk when clamping, holds the monitor really well and easy to adjust them up and down, great value for money, hides cables very well too and clears desk space up very well

Great price, easy enough to assemble, the height settings are fixed increments, but they seem to work fine, for me at least, swivel range quite good, rotate is fine (if you need or can use it) and tilt range is fairly small but again this is fine as this stand is really as direct monitor stand replacement so should really considered as such so this is basically a stand, and you would be facing the monitor front and centre, so does not work in the same way a monitor arm would with multiple directions of travel. Monitor size, I have 38" monitor attached, which weighs 8kg, with no issues, of course it wont rotate as it is too big, but this is not an issue for me, The only real issue I experienced is with the tilt, the 'reinforcement knob' is tucked away, and is quite small, so once the monitor is in place and you need to adjust the tilt, it is a bit tricky. Overall a decent stand if you are looking for a direct replacement for your current monitor stand, it connects to the desk easily with a generous range for the c-clamp, note however, there is no rubber on the upper part of the clamp that sits on the desktop, I have placed my own bit of rubber under it, and the only other issue I had was that the spacers provided were too short, luckily I had some longer ones which I used, nice to have a little more space on the desktop under the monitor too.

Very sturdy, easy to assemble. Various mounting options depending on your needs. No additional tools needed, everything is in the box. Highly recommend.

I am using this with a Samsung 28UR55 monitor, attached to an Ikea desk via the clamp rather than drilling through the desk. Assembly was very simple - all the parts are in labelled bags and to be honest it is very straightforward anyway. The stand itself is separate from the VESA mount which attaches to the monitor so you can easily lift the monitor on and off if needed, it has a handy cable route to keep everything tidy too. The Samsung monitor has its VESA mount recessed which initially caused me an issue as the 100mm bits meant this wouldn't fit into the recess, but then I realised that the mount came with spacers and voila! All attached no problem. Stability is great - I did worry that it may not be strong enough but this thing is going nowhere - the bolts which allow for tilt adjustment are big so you can tighten them really well, but at the same time the side to side adjustment is easy and fluid so you can easily change the horizontal view. I wasn't expecting the quality that I got so am really impressed, particularly as it was one of the cheaper options available.

fantastic, is very sturdy and easy to setup

After using for about 12 months has proved reliable, can handle additional weight of Mac mini M2 with cage and 27” monitor, Desk mounting could be more robust, but I’m general happy with overall construction.

Great does exactly what it should do. You might need a VESA adaptor depending on your monitor/TV. The instructions aren't great, but it's easy enough to put together. I have a 43" monitor, and it handles the weight easily. Great product.

👍🏻

Support de bonne qualité, le seul bémol étant qu'aucune protection caoutchoutée n'est prévue au niveau de la partie supérieure de la pince.

Ontzettend goed product voor de prijs!

デスクに直置きしていたモニターをこのアームに替えたら、机の上がかなりすっきりしました。高さや角度の調整もしやすく、自分の見やすい位置に簡単に合わせられます。 作りもしっかりしていて、設置後はぐらつきも特に感じませんでした。取り付けも思っていたより簡単で、付属のパーツだけで問題なく設置できました。 デスクスペースを広く使えるようになったので、作業もしやすくなりました。この価格なら十分満足できる商品だと思います。

Je recommande un bureau longue de 60cm. Mais c’est un support tres pratique